Poster Session

NO.	Title	Reporter
P-01	Effect of latex binder on the capillary-driven network and properties of Li-ion battery slurry	Jieun Park
P-02	All-Printed stretchable thin film heater for thermochromic applications	Shiuan-Ying Peng
P-03	Effects of SiO2 on the Electrical Property of Poly(ethylene oxide) (PEO)-based Polymer Electrolytes	Sun Kyung Kim
P-04	Drying behavior of O/W emulsion containing volatile oil	Katsuyuki Hasegawa
P-05	Printing Stable Patterns on Curvilinear Surfaces for Omnidirectional Antenna	Hsien-Lung Chiu
P-06	Rheological effect of SiNP on the PVA-AgNW suspension and morphological and electrical properties of its film states	Seung Hak Lee
P-07	Rheological properties and drying behavior of electrode model slurries with poly(acrylic acid) at different pH	Min Hwan Jeong
P-08	Shear-induced migration of bidisperse suspension in Poiseuille flow	Jin Seok Park
P-09	Caproic acid capped Cu nanoparticles film with compact structure by intense pulsed light	Wan-Yu Chung
P-10	Control of structure of organic-inorganic hybrid perovskite thin films for solar cell devices using ultrasonic spray method	Kento Tanaka
P-11	Effect of film preparation condition on spatial structures of nanoparticles in polymer nanocomposite thin films	Naoto Kobayashi
P-12	Effect of Hybrid UV-LED on Cured State of UV Curable Resin	Keigo Sawa
P-13	Slot Die Simulation	Yu-Kai Lin
P-14	Speckle pattern analysis of the film formation process of emulsion – silicate paint	Taizo Fukatsu
P-15	Suppressed cracking by adding surface-active polymers in particle dispersion films	Kouhei Minobe
P-16	A facile approach to synthesize graphene nanosheets via microwave exfoliation for heat dissipation applications	Yi-Chin Lai
P-17	Slot coating of Perovskite solar cell layer	Kwanhong Do
P-18	Numerical computation of CNT fiber spinning process design for CNT/CSA solution	Minho Lee
P-19	Drying characteristics of suspensions affected by particle shape using multispeckle diffusing wave spectroscopy	Kevin Injoe Jung
P-20	Control of physical property and structure in thermally activated delayed fluorescence thin films prepared by coating process	Shun Ouchi
P-21	Mix Reactive Droplet in a Powder Bed	Ting-Yu Cheng
P-22	Numerical analysis of thermocapillary flows over substrate with topography using finite element simulation	Jaehyun Yoo
P-23	Measurement and analysis of 355 nm UV laser induced photopolymerization of stereolithography resin	Ken Tanaka
P-24	Preparation of p-type oxide semiconductor thin films by wet processes	Mai Miyazaki

Submission

Short abstract should be written under 200 words (Template Download) and no more than one page. 

All presenting author need to prepare abstract and submitted before April 16th.

Abstract Submission

Registration

Registration fee：

Pay

Travel Information

Map of NTU

Welcome reception:

College of Engineering Building ( Discussion Room239)

Workshop & Lecture:

College of Engineering Building(203)

Poster exhibition:

College of Engineering Building(203) Hall

Transportation：

By Subway: The nearest subway station is Gongguan station (green line , G07), 10 min by walk.

Access to Taipei, Taiwan

Taipei is the capital and a special municipality of Taiwan.

Taipei is home to various world-famous architectural or cultural landmarks which include Taipei 101, Chiang Kai-shek Memorial Hall, Dalongdong Baoan Temple, Hsing Tian Kong, Lungshan Temple of Manka, National Palace Museum, Presidential Office Building, Taipei Guest House, Ximending, and several night markets dispersing over the city. Its natural features such as Maokong, Yangmingshan, and hot springs are also well known to international visitors.

Access to the University of Taiwan

NTU's institutional predecessor was Taihoku Imperial University, founded in 1928 by the Japanese colonial administration.

Now, the university has 11 colleges, with 54 departments and 103 graduate institutes, plus four university-level research centers: Population and Gender Studies Center, Center for Condensed Matter Sciences, Center for Biotechnology, and Bio-diversity Research Center. The total number of students, including those enrolled at the School of Professional and Continuing Studies, has grown to over 33,000, including over 17,000 university students and 15,000 graduate students. Now, the number of graduate students at NTU almost equals the number of university students, which indicates that NTU has successfully been transformed into a research university.

The nearest subway station is Gongguan station (green line , G07), 10 min by walk.

NTU Campus Map

Program Overview

10^th Asian Coating Workshop Schedule

↠Please download the 10^th ACW Program here.

May 9, 2018
Time	Event	Location
18:00 - 20:00	Registration	College of Engineering Building(203)		All Participants
18:30 - 20:30	Welcome Reception	College of Engineering Building(203)		All Participants
May 10, 2018
Time	Report type	Speech Title	Speaker		Institution
Session I		Session Chair: Prof. Ying-Chih Liao
9:00 - 9:10	Ceremony	Opening Remark	Wen-Chang Chen		National Taiwan University
9:10 - 9:35	Keynote	From Lab Coating Research to Industrial Coating Products	Ta‐Jo, Liu		National Tsing Hua University (Company)
9:35 - 10:00	Keynote	Back diffusion in drying liquid films	Masato Yamamura		Kyushu institute of technology
10:00 - 10:25	Keynote	e-Paper Application and Manufacturing Technology	Peter Peng		E-Ink (Company)
10:25 - 10:50	Poster Set-up & Coffee break
Session II		Session Chair: Prof. Masato Yamamura
10:50 - 11:15	Keynote	Recent studies on drying of colloidal suspensions and emulsions	Susumu Inasawa		Tokyo University of Agriculture and Technology
11:15 - 11:40	Keynote	Analysis of thin film formation flows (Recent research in Nam’s group)	Jaewook Nam		Seoul National University
11:40 - 12:05	Keynote	On the recent development of coating technology and applications in the Institute of Applied Mechanics, National Taiwan University	An-Bang, Wang		National Taiwan University
12:05 - 13:00	Lunch
Session III		Session Chair: Prof. Susumu Inasawa
13:00 - 13:25	Keynote	Rheological investigation of the slurry of positive electrode of LiB for understanding the formation of internal structure	Yoshiyuki Komoda		Kobe University
13:25 - 13:50	Keynote	Challenge for well-designed coating process of organic/inorganic semiconductor films.	Enju Sakai		The University of Tokyo
13:50 - 14:15	Keynote	Recent studies on precision printing and ink formulation development at Department of Chemical Engineering, National Taiwan University	Ying-Chih Liao		National Taiwan University
14:15 - 14:30	Coffee Break
Session IV		Session Chair: Prof. Jaewook Nam
14:30 - 14:33	Student Oral	Effect of latex binder on the capillary-driven network and properties of Li-ion battery slurry	Jieun Park		Seoul National University
14:33 - 14:36	Student Oral	All-Printed stretchable thin film heater for thermochromic applications	Shiuan-Ying Peng		National Taiwan University
14:36 - 14:39	Student Oral	Effects of SiO2 on the Electrical Property of Poly(ethylene oxide) (PEO)-based Polymer Electrolytes	Sun Kyung Kim		Pusan National University
14:39 - 14:42	Student Oral	Drying behavior of O/W emulsion containing volatile oil	Katsuyuki Hasegawa		Tokyo University of Agriculture and Technology
14:42 - 14:45	Student Oral	Printing Stable Patterns on Curvilinear Surfaces for Omnidirectional Antenna	Hsien-Lung Chiu		National Taiwan University
14:45 - 14:48	Student Oral	Rheological effect of SiNP on the PVA-AgNW suspension and morphological and electrical properties of its film states	Seung Hak Lee		Pusan National University
14:48 - 14:51	Student Oral	Rheological properties and drying behavior of electrode model slurries with poly(acrylic acid) at different pH	Min Hwan Jeong		Seoul National University
14:51 - 14:54	Student Oral	Shear-induced migration of bidisperse suspension in Poiseuille flow	Jin Seok Park		Korea University
14:54 - 14:57	Student Oral	Caproic acid capped Cu nanoparticles film with compact structure by intense pulsed light	Wan-Yu Chung		National Taiwan University
14:57 - 15:00	Student Oral	Control of structure of organic-inorganic hybrid perovskite thin films for solar cell devices using ultrasonic spray method	Kento Tanaka		The University of Tokyo
15:00 - 15:03	Student Oral	Effect of film preparation condition on spatial structures of nanoparticles in polymer nanocomposite thin films	Naoto Kobayashi		Tohoku University
15:03 - 15:06	Student Oral	Effect of Hybrid UV-LED on Cured State of UV Curable Resin	Keigo Sawa		Kanazawa University
15:06 - 15:09	Student Oral	Slot Die Simulation	Yu-Kai Lin		National Taiwan University
15:09 - 15:20	Tea Time Poster Presentation: Q&A and Discussion
Session V		Session Chair: Prof. Yoshiyuki Komoda
15:20 - 15:23	Student Oral	Speckle pattern analysis of the film formation process of emulsion – silicate paint	Taizo Fukatsu		Kobe University
15:23 - 15:26	Student Oral	Suppressed cracking by adding surface-active polymers in particle dispersion films	Kouhei Minobe		Kyushu Institute of Technology
15:26 - 15:29	Student Oral	A facile approach to synthesize graphene nanosheets via microwave exfoliation for heat dissipation applications	Yi-Chin Lai		National Taiwan University
15:29 - 15:32	Student Oral	Slot coating of Perovskite solar cell layer	Kwanhong Do		Sungkyunkwan University
15:32 - 15:35	Student Oral	Numerical computation of CNT fiber spinning process design for CNT/CSA solution	Minho Lee		Seoul National University
15:35 - 15:38	Student Oral	Drying characteristics of suspensions affected by particle shape using multispeckle diffusing wave spectroscopy	Kevin Injoe Jung		Korea University
15:38 - 15:41	Student Oral	Control of physical property and structure in thermally activated delayed fluorescence thin films prepared by coating process	Shun Ouchi		The University of Tokyo
15:41 - 15:44	Student Oral	Mix Reactive Droplet in a Powder Bed	Ting-Yu Cheng		National Taiwan University
15:44 - 15:47	Student Oral	Numerical analysis of thermocapillary flows over substrate with topography using finite element simulation	Jaehyun Yoo		Seoul National University
15:47 - 15:50	Student Oral	Measurement and analysis of 355 nm UV laser induced photopolymerization of stereolithography resin	Ken Tanaka		Kanazawa University
15:53 - 15:56	Student Oral	Preparation of p-type oxide semiconductor thin films by wet processes	Mai Miyazaki		The University of Tokyo
15:56 - 17:00	Poster Presentation: Q&A and Discussion
17:30 - 20:00	ACW Member Meeting	Seafood Steam Pot	All Professors & Industrial Representatives
17:30 - 20:00	International Student Tour	Eyaji Restaurant	All International Students
May 11 , 2018
Time	Event		Chair		Institution
09:00 - 09:30	Gathering at NTU main entrance		Ying-Chih Liao		National Taiwan University
09:30 - 10:00	Transit to E-Ink		-		E-Ink Company Show Room
10:00 - 11:30	E-Ink Show Room		Peter Peng
11:30 - 13:00	Lunch
13:00 - 14:00	Transit to Vigor Dream Factory		-		Vigor Dream Factory
14:00 - 17:00	Vigor Dream Factory		All Professors and Students
17：00	Banquet (Howard Civil Service International House)		All Professors and Students

Instruction for Poster Presentation：

• Poster form：The space available is 841 mm x 1189 mm (width x height).

•The poster session will take place on Thursday 10 May from 09:30 to 16:00. This includes the time to meet conference participants and answer questions. This will be the ONLY time that your poster will be on display and that other conference members will be able to see it. It will be an interactive session, so come ready to talk to your ‘viewers’, and to answer questions!

Instruction for Oral presentation ：

•Presentation time is 3 minutes.

If you have any question, feel free to send e-mail to us.

In ACW2018, wonderful session will be held on each day.

Program at a glance

	May 9 (Wed)	May 10 (Thu)	May 11 (Fri)
Morning	-	Topical Session (Professor)	Site visit to E-ink Factory
Afternoon	-	Presentation (Student)	Site visit to Vigor Dream Factory
Evening	Registration Welcome Reception	Faculty Meeting	Banquet
		Dinner (International Student )